SINGER® Gathering Presser Foot for Sergers

Description

Serger Settings:
Needles: Two or one
Stitch Type: Three or four-thread overlock
Stitch Length: Longer Stitch
Differential Feed: Higher Setting
Upper Knife: Engaged

Instructions to gather a single layer of fabric:

1. Snap the Gathering Foot onto the machine.
2. Position the fabric under the foot from the left side.
3. Lower the presser foot and sew.

Instructions to gather and attach a second flat fabric simultaneously:

1. Snap the Gathering Foot onto the machine.
2. The width of the seam allowance can be adjusted by loosening the screw on the front of the foot, sliding the guide to the desired position, then re-tightening the screw.
3. Place the fabric to be gathered right side up, between the Gathering Foot and the needle plate.
4. Place the fabric that will NOT be gathered into the opening of the foot with the right side down.
5. Lower the presser foot and sew. Keep the two layers of fabric aligned to the guide on the right of the foot. Let them feed together while gathering and stitching together.

Gather light to medium weight fabric easily with your serger.